Removing The Battery - VonHaus 15/200 UK Manual De Instrucciones

INSTALLING & REMOVING
THE BATTERY
WARNING! Always switch off the tool before removing or inserting the Battery.
Align the notches to the base of the Pole Trimmer
Rear Handle, with those on the Battery and slide the
Battery and Pole Trimmer together until the Battery
locks into place.
CAUTION: Do not use excessive force when inserting
the Battery if resistance occurs. If the Battery does
not slide in easily, it is not being inserted correctly
and could cause damage to the Battery, terminals or
the Pole Trimmer.
WARNING: Do not operate the switches whilst
inserting the Battery.

REMOVING THE BATTERY

Press the Battery Release Buttons (16) to release
the Battery from the Pole Trimmer and slide away
from the body to remove.
SHORT TRIMMER ASSEMBLY
To assemble the Hedge Trimmer, take the
EXTENSION POLE and unlock the TRIMMER
RELEASE LEVER (9) and insert the TRIMMER UNIT
until the pin has clicked into place, then push the
Trimmer Release Lever back into place to secure.
Lock
Release
7