VISSION 46023 Manual De Instrucciones página 7

ENGLISH
Intended Use/Indications
This product is intended to restrict
movements in CMC and MCP 1
joints and to position the thumb in a
functional position. Indications such
as CMC and MCP 1 osteoartrosis or
instability, Trigger Finger, Morbus De
Quervain. Intended for one persons
use.
Contraindications
No known
Limitations
This product should only be altered
by a medical professional person. The
prescriber will determine the duration
and conditions for use.
Warnings
Make sure that the straps are not
too tight. If any sign of skin irritation
occurs, immediately remove the
support. Check your skin on a daily
basis.
46023 VISSION THUMB ORTHOSIS
LONG WITH STAY
Carefully read this instruction sheet before use!
Instructions for use
1. Check that the support is
2. Open the Velcro straps for the
3. Place the orthosis over the thumb.
4. Close the straps around the wrist.
5. Adjust all straps for comfort.
6. If needed, shape the stay on the
Material Specifications
Made from cotton, nylon, polyester,
lycra and polyurethane. Spoon made
in Manganese. This product is not
flame retardant. Latex free.
Washing Instruction
Close all Velcro prior to laundering.
Machine wash in 40°C (104°F), gentle
cycle. Use a washing bag. Dry flat. Do
not tumble dry or dry clean.
Who to Contact
Contact your fitter or store where
purchased if you have questions
regarding the use of the product.
complete and without damage.
wrist.
Then adjust the thumb strap.
thumb side.