5. It is also possible to pull out the appliance from the body case (13)
a. Pull the button (14) on the body case (13) to the back position
b. Pull the vacuum cleaner out of the body case (see fig. below).
6. Assemble the stick (11) into the body case (13) by inserting the stick in the hole (see fig. below).
7. To pull out the stick (11) from the body case (13), press button (15) and pull.
8. Assemble the turbo brush (12) by inserting it in the hole, as shown below.
9. To pull out the brush, press button (16) at the bottom of the body case (13) and pull outside (see fig.
below).
15