Unpacking; Reception Of Packaged Product; Handling; Appliance Identification - Suzohapp World Key Guía Rápida

Take care with the electrical connections. Faults due to failure to follow the warnings of this
publication are not covered by warranty.
Significant situations that need to be followed strictly are signalled by specific symbols in
this manual.

3. Unpacking

3.1 Reception of packaged product

Check upon receipt that the product has not been damaged during transport. If any damage
is noticed, notify the transporter immediately.
After transport the package must be intact, that is, it must
 Show dents, signs of shocks, deformation or breakages of the container.
 Show areas that are wet or signs that would point to the fact that the casing has been
exposed to rain, frost or heat.
 Show signs of tampering.
Also, check that the content of the package matches the order.

3.2 Handling

To prevent damage to the machine, it is recommended to transport it
exclusively inside its original packaging.
We recommend:
not
 to bump the machine
not
 to leave the machine (even if still in the package) exposed to atmospheric agents

3.3 Appliance identification

The plate is on the front of the World Key and World Key Lite devices.
The plate is on the back of the World Key Move device.
The plate bears the main operating data and the serial number identifying the device. This
number must always be mentioned when contacting the manufacturer for assistance, spare
parts, repairs or information concerning operation of the equipment.
It is forbidden to remove the identification plate from the appliance or
to tamper with the data it contains. Should it be damaged or lost, ask
the manufacturer to have it replaced with a new one.
Remember that the warranty is linked to the identification number of
the machine.
not
:
EN
43