System Build 9668015 Manual De Instrucciones página 18

STEP 10
4
With the help of another person, turn the unit over on its front side. Positon back panel
as shown. Align squarely with outer edges. Flush bottom edge of back panel with
bottom edge of the bottom and nail straight into back edges of left panel (A), right panel
(B), top (D) and bottom (E).
Assure that the unit is square.
Distance from corner to corner
must be equal as shown.
systembuild.com
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT
AND MUST BE INSTALLED PROPERLY.
(x46)
#A21110
unfinished
surface
B
Make sure edge of back panel is flush
with bottom edge of the bottom.
18
E