Operating Instructions
PRIOR TO USING FOR THE FIRST TIME
A. FILL THE RINSE
AID DISPENSER
OPENING THE DISPENSER
1
To open the dispenser, turn the cap to the "open" (left) arrow and lift it out.
2
Pour the rinse aid into the dispenser, being careful not to overfill.
3
Replace the cap by inserting it aligned with "open" arrow and turning it to the closed (right) arrow.
RINSE AID DISPENSER
The rinse aid is released during the final rinse to prevent water from form-
ing droplets on your dishes that can leave spots and streaks. It also
improves drying by allowing water to sheet off the dishes. Your dishwash-
er is designed to use liquid rinse aids. The rinse aid dispenser is located
inside the door next to the detergent dispenser. To fill the dispenser, open
the cap and pour the rinse aid into the dispenser until the level indicator
turns completely black. The volume of the rinse aid container is about
110ml.
FUNCTION OF RINSE AID
Rinse aid is automatically added during the last rinse, ensuring thorough
rinsing, and spot and streak free drying.
Never fill the rinse aid dispenser with any other substances (e.g.
dishwasher cleaning agent, liquid detergent). This would damage
the appliance.
WHEN TO REFILL THE RINSE DISPENSER
The amount of rinse aid can be judged by the color of the optical level
indicator "C" located next to the cap. When the rinse aid container is full,
the whole indicator will be black. As the rinse-aid diminishes, the size of
the dark dot decreases. You should never let the rinse aid get below 1 / 4
full.
As the rinse aid diminishes, the size of the black dot on the rinse aid level
indicator changes, as illustrated below.
Full
3/4 full
1/2 full
1/4 full should refill
to eliminate spotting
Empty
5
ATTENTION
C (Rinse-Aid Indicator)
ATTENTION
Clean up any rinse aid
spills during filling with
an absorbent cloth to
avoid excessive foaming
during the next wash.
Don't forget to replace
the cap before you close
dishwasher door.