Publicidad
Idiomas disponibles
Idiomas disponibles
OBJ_BUCH-0000000305-001.book Page 11 Thursday, March 29, 2018 1:54 PM
For your safety.
Do not use this machine before you have thor-
oughly read and completely understood theseop-
erating instructions, including the figures,
specifications, and safety regulations.
Please also observe the relevant national industrial safe-
tyregulations (e. g. in Germany: BGV A2, BGR 500).
Non-observance of the safety instructions in the said
documentation can lead to an electric shock, burns
and/or severe injuries.
This Instruction Manual should be kept for later use and
enclosed with the power tool, should it be passed on or
sold.
Intended use of the machine.
This machine is intended for grinding metal materials
using the grinding belts and accessories recommended by
FEIN in weather-protected environments.
Special safety instructions.
Wear personal protective equipment. Depending on appli-
cation, use face shield, safety goggles or safety glasses.
Where appropriate, wear dust mask, hearing protectors,
gloves and workshop apron capable of stopping small
abrasive or workpiece fragments. The eye protection
must be capable of stopping flying debris generated by
various operations. The dust mask or respirator must be
capable of filtrating particles generated by your opera-
tion. Prolonged exposure to high intensity noise may
cause hearing loss.
While working, do not wear loose clothing, jewellery or
open, long hair. Despite protective devices, loose objects
can be snagged or caught by moving parts and lead to
injury.
Do not use worn, torn or heavily clogged grinding belts.
Handle grinding belts carefully and store them according
to the manufacturer's instructions. Do not bend or fold
grinding belts! Damaged grinding belts can tear, be flung
away and injure someone.
Do not use grinding belts or other accessories which are
not specifically designed and recommended by the power
tool manufacturer. Safe operation is not ensured merely
because a grinding belt or accessory fits your machine.
Always use the protective devices attached on the
machine. The protective devices must be securely
mounted to the machine in order to achieve maximum
safety. The protective devices are supposed to protect
the user from grinding particles thrown from the machine
and from accidental contact with the grinding belt.
Warning! Danger of fire and explosion! When grinding
metals (e.g., aluminium or magnesium), dust develops
that may be combustible or explosive. Do not operate the
machine near flammable materials. Sparks could cause
these materials to ignite.
Pay attention that other persons are not put at risk from
sparking. Remove flammable materials in close vicinity.
Sparking occurs when grinding metal.
Keep bystanders a safe distance away from work area.
Anyone entering the work area must wear personal pro-
tective equipment. Fragments of workpiece or of a bro-
ken accessory may fly away and cause injury beyond
immediate area of operation.
The workpiece must always lie securely on the grinding
rest and the stop. Workpieces that are too small or too
thin may not be worked. Danger of injury from work-
pieces being thrown from the machine.
The surface being worked can become very hot. Do not
touch it with your hands.
Never touch the running grinding belt. Danger of
injury.
In situations of danger, immediately press the safety
pushbutton. The machine runs on for approx. 50 sec-
onds.
Clean the ventilation openings on the power tool at regu-
lar intervals using non-metal tools. The blower of the
motor draws dust into the housing. An excessive accu-
mulation of metallic dust can cause an electrical hazard.
Ensure that the machine is positioned securely and hori-
zontal. Serious injuries can be caused if the machine tips
over during operation.
The mains plug of the machine may be mounted only by
a qualified electrician. The protective conductor in the
mains socket outlet must be connected with the protec-
tive earthing of the mains supply.
Pull out the mains plug for maintenance and repair!
Switching the machine on unintentionally can lead to
serious injuries.
Have the electrical safety of the machine checked regu-
larly in accordance with statutory regulations. For
machines that have not been checked, there may be dan-
ger of electrical shock!
Check the rotation direction of the motor before starting
the operation of the machine for the first time. If the rota-
tion direction of the motor is incorrect, the workpiece
can be thrown from the machine and cause an accident.
The rotation direction may be changed only by a quali-
fiedelectrician.
Make sure that you or other persons are not standing
directly next to the grinding belt when switching the
machine on. The grinding belt can tear apart and cause
serious injuries.
Handling hazardous dusts
For work procedures with this power tool where mate-
rial is removed, dusts develop that can be hazardous to
one's health.
Contact with or inhaling some dust types, e. g. asbestos
and asbestos-containing materials, lead-containing coat-
ings, metal, some wood types, minerals, silicate particles
from materials containing stone, paint solvents, wood
preservatives, antifouling paints for vessels, can trigger
allergic reactions to the operator or bystanders and/or
lead to respiratory infections, cancer, birth defects or
other reproductive harm. The risk from inhaling dusts
depends on the exposition. Use dust extraction matched
appropriately for the developing dust, as well as personal
protective equipment and provide for good ventilation of
en
11
Publicidad
