Descargar Imprimir esta página

Hydrofarm thirsty light DIGITAL Guia De Inicio Rapido

Publicidad

Enlaces rápidos

Instructions / User Guide
ENG
How to Use your Thirsty Light:
1. Check plant pot's drainage holes. If blocked or clogged, use a
pencil or straw to clear.
2. Pour water evenly over the entire surface of the plant's soil
until water comes out the drainage holes.
3. Drain water at the base of the plant.
4. Twist the bottom of the Thirsty Light to the "ON" position.
Watch the main body of the bug for a long, single light blink. If
you do not see this, change the bug's batteries.
5. Push the Thirsty Light into the soil in the area between the pot
rim and the plant stem, up to about one inch below the black
battery casing. Place the light where you'll be able to see it –
not obscured by leaves or flowers. Do not let the black body
casing touch the soil.
6. Press the soil around the probe snugly to keep the probe
upright. Avoid moving the soil or touching the probe after it
is inserted.
7. Check the light in the bug's body. A fast-blinking light means
the soil is dry and it is time to add water.
8. Repeat the process with additional Thirsty Lights in other
plants. We recommend purchasing one Light per potted plant
– complete your collection of bugs!
Tips:
• Do not use softened water with this product.
• After prolonged exposure to soil and water, the metal probe
may change color. This is a natural part of the corrosion process
and does not signal a need for replacement.
• Do not use the Thirsty Light with coarse soil, sandy soils, or
orchid mix.
• An over-fertilized pot may give a false reading, preventing the
bug from blinking, even when the soil is actually dry.
Best Battery Practices:
• The Thirsty Light takes two 1.5V AG13 batteries, in the black
casing between the bottom of the bug and the top of the
probe. A Phillips-head screwdriver is required to change the
casing.
• To test the batteries, turn the Light to the "OFF" position and
immediately to the "ON" position. One long blink means the
batteries are ready for use. Triple blink with a pause or no
blinking at all means it is time to change the batteries.
hydrofarm.com
Instructions / User Guide
Congratulations!
Your purchase of the
Thirsty Light puts you one step closer to
success with your house plants and garden
pots. While most gardeners and horticulture
enthusiasts know that not enough water can
be deadly for their greenery, the opposite
is also true. We created the Thirsty Light so
you'll always know when your plants' water
supply is just right.
HGTLBB
HGTLBF
HGTLLB
Three
fun bugs!
Collect
them all!
hydrofarm.com

Publicidad

loading

Resumen de contenidos para Hydrofarm thirsty light DIGITAL

  • Página 1 • To test the batteries, turn the Light to the “OFF” position and them all! immediately to the “ON” position. One long blink means the batteries are ready for use. Triple blink with a pause or no blinking at all means it is time to change the batteries. hydrofarm.com hydrofarm.com...
  • Página 2 Un parpadeo triple con una pausa o ningún Blinken oder eine Pause oder kein Blinken bedeutet, dass die changer les piles. parpadeo significa que es tiempo de cambiar las baterías. Batterien ausgetauscht werden müssen. hydrofarm.com hydrofarm.com hydrofarm.com...

Este manual también es adecuado para:

HgtlbfHgtlbbHgtllb