Troubleshooting
see Assistance
GB
Problem:
Possible causes / Solutions:
The washer dryer does not
switch on.
The wash cycle does not start.
see How to run a wash cycle or a drying cycle).
The washer dryer does not take
in water (the text "NO WATER,
CHECK SUPPLY" appears
on the display).
The washer dryer continuously
takes in and
see Installation)
drains water.
see Installation)
The washer dryer does not drain
or spin.
see Wash cycles and functions
see Wash cycles and functions
see Installation)
The washer dryer vibrates a lot
see Installation)
during the spin cycle.
see Installation)
see Installation)
The washer dryer leaks.
see Installation)
see Care
and maintenance)
see Installation .
The machine is locked and the
display flashes, indicating an
error code (e.g. F-01, F-..).
There is too much foam.
The washer-dryer does not dry.
OFF
13