Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Please read and save these instructions. Read through this owner's manual carefully before using product. Protect yourself and others by observing all safety
information, warnings, and cautions. Failure to comply with instructions could result in personal injury and/or damage to product or property. Please retain
instructions for future reference.
Model
Volts
Watts
52YK83
120V
38W
52YK84
120V
38W
52YK85
120V
38W
Dimensions (In)
Model
L
52YK83
13
9.8
52YK84
60
9.8
52YK85
40
9.8
Unpacking
After unpacking unit, inspect carefully for any damage that may have occurred during transit. Check for loose, missing, or damaged parts. Shipping
damage claim must be filed with carrier.
General Safety Information
• This fixture must be installed in accordance with all electrical and safety codes and
ordinances and the most recent National Electric Code (NEC) and the Occupational Safety and Health Act (OSHA).
• When portable fixtures are used outdoors, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal
injury.
• Only use outdoor extension cords that have three pronged grounded plugs and fit the unit's plug.
• Ground fault circuit interrupter (GFCI) protection should be provided on the circuit(s) or outlet(s) to be used for the wet location portable fixtures.
• Only use extension cords designed for outdoor use; types SW, SW-A, SOW, SOW-A, STW, STW-A, STOW, STOW-A, SJW, SJW-A, SJOW, SJOW-A,
SJTW,SJTW-A, SJTOW, and SJTOW-A.
• Do not open the work light body. There are no user serviceable parts inside.
• Keep fixture away from children.
• Do not use heavy volatile fluids such as gasoline to clean the fixture.
• Do not use the fixture when the glass safety shield is missing.
• This unit is not intended or safe to use in locations with explosive or flammable environments.
• This fixture must be installed to a minimum 50mm thick wood surface.
Avoid looking directly at the light fixture as the brightness may cause damage to sensitive eyes.
LED Loading Dock Light
52YK83/52YK84/52YK85
52YK83
52YK84
Color
Lumen
CRI
Temp.
Output
5000K
4100Lm
80
5000K
4100Lm
80
5000K
4100Lm
80
W
H
3.5
15.15
15.15
52YK85
Electrical Cord
10ft, 18AWG/3C SJTW
10ft, 18AWG/3C SJTW
10ft, 18AWG/3C SJTW
1

Publicidad

loading

Resumen de contenidos para LumaPro 52YK83

  • Página 1 LED Loading Dock Light 52YK83/52YK84/52YK85 Please read and save these instructions. Read through this owner’s manual carefully before using product. Protect yourself and others by observing all safety information, warnings, and cautions. Failure to comply with instructions could result in personal injury and/or damage to product or property. Please retain instructions for future reference.
  • Página 2 Only fixture 52YK83 is designed for post mounting. 3. Carefully loosen the bolt and nut located on the short arm. Attach U-Shaped bracket to the short arm with a bolt and a nut. Make sure that the bolt &...
  • Página 3 2.L’appareil est spécialement conçu pour le montage mural ou le montage de poste et exige une surface plate etverticale d'environ 3 "de largeur et 5" de hauteur. Quatre 3/8 "boulons sont fournis pour le montage. appareil est spécialement conçu pour les bras de montage (52YK83 seulement).
  • Página 4 2.El aparato está diseñado para montaje en pared o poste y requiere una superficie plana y vertical de aproximadamente 3 " de ancho y 5" de altura. Además, se suministran cuatro 3/8 "pernos para el montaje. la instalación está diseñada para el brazo del montaje (52YK83 sólo).

Este manual también es adecuado para:

52yk8452yk85