Descargar Imprimir esta página

Publicidad

Enlaces rápidos

Visit us on the web:
www. safcoproducts.com
PRODUCT WARRANTY REGISTRATION is available online at: www.safcoproducts.com
PARTS LIST
CODE
DESCRIPTION
A
Base
B
Glide
C
Pump Assembly
D
Footring
E
Footring Knob
F
Seat Assembly
G
Knob with Cone Point
H
Back Support Bar
I
Back Bellows
J
Knob with Flat Point
K
Backrest Assembly
1
Turn the Base (A) upside down and insert the five Glides
(B)into the ends of the Base spokes. Turn the Base right
side up.
2
Insert the Pump Assembly (C) into the base, tapered end
down. Secure the pump assembly by applying a little down-
ward pressure. DO NOT PUSH ON BUTTON AT THE TOP!
Remove plastic cap.
3
Slide the Footring (D) over the Pump Assembly and secure in
the desired position using the Footring Knob (E) (already in
place).
4
Place the Seat Assembly (F) onto the Pump Assembly.
Press down firmly (or sit) to lock into place.
5
Insert Back Support Bar (H) with Back Bellows (I) into brack-
et on bottom of seat assembly. Use a standard screwdriver to
depress push button near end of back support bar. Slide bar
until push button locks into bracket. Remove Knob with Cone
Point (G) from parts bag. Thread knob into bracket and tight-
en to secure back support bar.
6
Slide the Backrest Assembly (K) into Back Support Bar (H).
Tighten Knob with Flat Point (J) to secure backrest.
7
Adjust the chair:
A. Adjust height of chair.
• Keep feet flat on the floor or on the footring.
• Use lever on right side to adjust height so you feel
NO pressure under the back of your thighs.
B. Adjust depth of backrest.
• Sit deep into the chair.
• Turn the bottom knob to position the support bar to
your comfort level.
• Tighten knob to fix the support bar in place.
C. Adjust height of backrest.
• Sit deep into the chair.
• Turn the back knob to position the backrest to your
comfort level.
• Tighten knob to fix the backrest in place.
For questions or concerns, please call the
6680-37MP: 1 of 2;
Rev. 4; 07/04
Economy Workbench Chair
A S S E M B L Y
READ THESE INSTRUCTIONS BEFORE STARTING! FOLLOW THE ASSEMBLY PROCEDURES CAREFULLY
TOOLS REQUIRED: Standard Screwdriver
QTY. PART NO.
1
6680-54
5
5110-25
1
3400-61
1
3401-62
1
3401-72
1
6680-51
1
6680-78
1
6680-55
1
6680-62
1
6680-77
1
6680-53
available Monday - Friday 8:00 AM to 4:30 PM (Central Time) (English-speaking operators)
I N S T R U C T I O N S
K
H
J
I
See Step 5
Safco Consumer Hot Line 1-800-664-0042
6680
G
NOTE: Remove
E
Plastic Cap
C
A
B
F
D
10167.01

Publicidad

loading

Resumen de contenidos para Safco 6680

  • Página 1 • Turn the back knob to position the backrest to your comfort level. • Tighten knob to fix the backrest in place. • Safco Consumer Hot Line 1-800-664-0042 For questions or concerns, please call the 6680-37MP: 1 of 2; Rev. 4; 07/04 available Monday - Friday 8:00 AM to 4:30 PM (Central Time) (English-speaking operators) 10167.01...
  • Página 2 Si tiene preguntas o dudas, sírvase llamar a la Línea Directa para pies. Clientes de Safco al 1-800-664-0042 disponible de Lunes a Viernes de • Utilice la palanca en el lado derecho para ajustar la altura de 8:00 AM a 4:30 PM (Hora central) (Operadores angloparlantes) manera que NO sienta presión debajo de la parte inferior de...