Reverberi M2700/7/1 Libreta Uso Y Manutencion página 7

Manuale del d'uso ed installazione – M2700/7/1 APRICUCITURA
• Don't utilize the machiner for other use, from those for that has been
realized
• Alwais wear DPI in the respect of the disposition antiaccident.
• Don't approach to machine with inflammable materials.
• Never leave the boiler, with lighted and placed on covering's cloth.
• The use is allow only to autorized person and howener adults.
• Proibition to clean or verificate during the movement.
• Prohibition to use water for putting the fire on elettric equipement
under tension.
• Don't put on the machine material with dimension ad weight such as to
compromise the stability's machine.
• Don't licht the machine in presence of more people that caused
accidental contact, could compromise the safety condition on ironing
machine.
• Don't put in function the device when the cable is not perfectly entre
or the structure is damage.
• This symbol it means the product is covered by the European Directive
2002/96/EC.
• Please inform yourself about the local separate collection system for electrical
products.
• Please act according to your local rules and do not dispose of your old products
with your normal household waste. The correct disposal of your old product will
help prevent potential negative consequences for the environement and human
healt.
(GB) INSTALLATION
Remove the machine from its wrapping. Take care to prevent the contents from being damaged.
The machine must be installed in a perfectly flat position. Adjust the height of the supports (M) if
necessary. The machine need not be fixed to the floor in any way.
Fit the pedals (E1) and (E2) in place.
ELECTRICAL CONNECTIONS
The machine has a main switch. It is therefore essential to connect the plug (D) to a socket projected by a
standard circuit-breaker with a capacity of at least 10A and a differential magnetothermic cutout with a gap
of at least 3 mm between its contacts.
Connect the plug of the ironing board (L) to the socket (G).
HOW TO TURN ON THE MACHINE
Turn on the main green switch (A).
AIR-POWER CONNECTION
The machine must be connected to a compressed air network with a pressure of at least 6 bar and a flow
rate of at least 50 liters per minute. Calibrate the two pressure reducers (F) so that the pointer of the
pressure gauge is on the red mark of the scale (4 bar).
del 03-01-2007 - C:\SETTORE STIRO\M2700-7-1\MANUALE ISTRUZIONI\M2700-7-1.doc Pag. 7 di 18