Phottix Aion Manual De Instrucciones página 5

Using the Lock Button
1. The Lock Button disabled all buttons on the
timer. This can be useful when running a long
multiple exposure program.
2. Press and hold the Backlight / Lock Button.
A lock symbol will appear on the LCD. No
buttons will function after the unit is locked.
3. To disengage: Press and hold the Backlight
/ Lock Button again until the lock symbol
disappears.
The Wireless Signal Strength Indicator
1. The Wireless Signal Strength Indicator on
the LCD shows the signal strength between
the timer and Receiver if The Aion system is
being used wirelessly.
2. Use this as an indication of range – when the
transmitter and Receiver are within range the
three bar icon will appear on the LCD.
3. When the transmitter and Receiver are not in
range the three bar icon will not appear.
Function LEDs on Timer and Receiver
The Function LED on the Timer will:
1. Turn green when focusing.
2. Turn red when a photo is taken.
The Function LED on the Receiver will:
1. Flash green when the Receiver is powered
on.
2. Turn to a solid green when a focus signal is
received from the Timer.
3. Turn red when a photo is taken.
Connecting the Timer or Receiver to a
camera
1. Turn off the timer and camera.
2. Attach a compatible Phottix Accessory Cable
to the Timer or Receiver.
3. Attach the other end to camera's remote
port.
4. Turn on the Timer and camera.
3