Hartan VIVA GTR Manual Del Usuario página 10

Instructions for use
adjust the back rest to incline the seat frame
Tilt the adjustment lever 13 at the rear to bring the seat frame from the
sitting to the lying position in two stages.
adjusting the footrest
By pressing the two red safety buttons 15 at the same time, the footrest
can be lowered. When lifting it, adjustment of positions is effected
automatically.
WARNING!
Safety harness
14
Secure your child with the 5-point belt system 14.
Make sure that the shoulder belts D are inserted and the belt fits snugly
against your child. You can adjust the length and tautness of the belts
with the belt ends F. You can adjust the width of the shoulder and lap
belts by tilting open the quick-release slider G and pulling on the belt E.
opening the belt: Press the two buttons B at the same time and remove
the magnetic closer a. The bottom fixing C can then be removed easily.
Closing the belt: Hold together the two fixings C and attach the magne-
tic closer a; the fastener locks automatically. .
automatic locking of the upper section
Place the seat frame on the chassis so that the two upper fastening com-
ponents rest on the locking bolts provided for this purpose. Both sides of
the lock mechanism 17 will automatically close when you press the seat
frame down.
WARNING!
ensure that the seat frame is securely in place
before use!
To release the lock mechanism, press the safety button to the right of the
release button on the back of the inclining seat frame and then press the
release button until the release is activated.
Grasp the hoop guard with your other hand to remove the seat frame.
9