ATH M126 Manual Del Usuario página 53

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 180
1.3.3. Operating the tyre changer
This instruction manual only details the function of the machine; it does not replace professional training
and qualification of operating personnel.
1.3.4. Clamping the wheel
There are different types of truck rims (Fig. 8
Use the four clamping jaws to select the appropriate clamp for the rim.
Place the tyre on the inside of the table for the mounting arm.
Move the table until just before the clamping jaws.
Lower the clamping head to the centre of the rim.
Open the clamping jaws until they are smaller than the diameter of the mounting hole.
Slide the tyre over the clamping jaws and open until the tyre is secure.
Check that the rims sit correctly in all four jaws and that the tyre turns smoothly, otherwise it is not
possible to assemble.
® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2020-03
WARNING!
All tyre changers have movable or adjustable controls. It is essential to ensure
that the operator always finds a working position where he can safely track
and view all work steps.
WARNING!
When tightening the rim, make sure that the clamping jaws are correctly
positioned on the rim to prevent the wheel from falling down.
E/1-E6).
Manufacturer ATH-Heinl GmbH & CO.KG
- 7 -

Publicidad

Tabla de contenido
loading

Productos relacionados para ATH M126

Tabla de contenido