Romus HC-3 Manual De Instrucciones página 7

93271 - INDICATEUR D'HUMIDITE HC-3
Mode d'emploi
HC-3 in menu mode
1 – Select the previous menu item or decrease a value, 2 – Confirm the selected option or
value, 3 – proceed to the next menu item or increase a value.
7. Alarm
Exceeding the set value will trigger a sound alarm. For each scale an individual alarm
threshold can be set. Alarm thresholds are set in the operating menu. To change the
setting for the material of choice, select the "Alarm Level" item in the operating menu and
press the "ON" button. After selecting the scale, press the "ON" button once again to set
the alarm threshold. After changing the alarm threshold, confirm the value by pressing the
"ON" button.
To protect against accidental changes, it is necessary to confirm the action by pressing the
„ON" button once again. To cancel the change, press the "SELECT MATERIAL" button.
Alarm thresholds are stored in the memory, even if the batteries are removed. If the
"Factory Settings" (Werkseinstellungen) option is selected, all the changes will be replaced
with the factory settings.
8. Language selection
The software has been designed to allow the user to choose between different languages.
The language is changed from the menu. To open the language selection menu, select the
Language item in the operating menu and confirm by pressing "ON". Select the language
and confirm by pressing "ON". To protect against accidental changes, it is necessary to
confirm the action To confirm the change press the "ON" button once again, press "SELECT
MATERIAL" to cancel. Language settings are stored in the memory, even if the batteries are
removed.
9. Restore factory settings
Factory reset will undo all the changes of the alarm thresholds. To restore the factory
settings, select the "Factory Settings" (Werkseinstellungen) item from the menu and
confirm by pressing the "ON" button. To protect against accidental changes, it is necessary
to confirm the action To confirm the change press the "ON" button once again, press
"SELECT MATERIAL" to cancel.