Cliplight, Kawe Dialight® Xl - KaWe DIALIGHT XL Instrucciones De Empleo

User's Manual
Diagnostic Lights, CLIPLIGHT, KaWe DIALIGHT® XL
Dear customer, thank you for choosing a KaWe pro-
duct. Our products are known for their high quality and
long life. This KaWe product meets EC standards
084/589 EWG (standards for medical products).
Please read these instructions thoroughly and
carefully before attempting to use this product
and heed the given instructions.
Familiarize yourself fully with this product
before using it.
Use: The diagnostic lights, CLIPLIGHT and KaWe DIA-
LIGHT® XL are only to be used by authorized profes-
sional personnel.
Purpose: The lights are to be used for the purpose of
illumination of the part of the body to be checked, e.g.
oral cavities, skin surfaces etc.
Operation: CLIPLIGHT: Turn on by pressing the clip
until contact with the ferrule of the pin has been cre-
ated. Change the lamp or the batteries by removing
the metallic lamp support.
KaWe DIALIGHT® XL: Turn on and off by pushing the
sliding switch. Change the lamp or the batteries (bat-
teries are not included) by removing the head from the
handle.
Diagnostic light: Turn on and off by pressing the black
pushbutton switch at the end of the clip. Change the
lamp or the batteries by removing the black clip part.
Unsuited use/contraindication of the products:
Any use other than that described here is not in accor-
dance with the intended use of the product. The manu-
facturer is not liable for any resulting damages. The
user alone bears the risk.
Guarantee: When used under normal circumstances
and with attention to these instructions we guarantee
this product for two years after the date of purchase.
(Except bulbs and rechargeable batteries.) Should you
need further information or should your instrument
require repair, please contact your dealer.
Instruction: Do not shine with the KaWe
DIALIGHT® XL into the eyes. Never bring the lights into
contact with liquid.
Limitation of reprocessing: No special require-
ments. It is recommended to reprocess the instrument
immediately after use.
Instructions
Workstation: Remove dirt accumulation on surfaces
with a disposable cloth/tissue.
Storage and transport: In order to avoid dirt accu-
mulation and dust, always store the lights in their
packaging. Caution: If the light is dropped it may break.
Cleaning preparation: No special requirements.
6