Backlight Setting; Moon Phase - Thompson 513631 Manual Del Usuario

C - CONFIGURATION
the ALERT button once. The
disappears
- To set the top and bottom value for alerts,
press and hold the press and hold the ALERT button for 3 seconds.
The Hi LED fl ashes. Using the UP and
DOWN button, set the max temperature that will
trigger the alert. Confi rm this setting by pressing
once on the ALERT button. The Lo LED then
fl ashes. Using the UP and DOWN buttons, you
can set the low temperature that will trigger the
temperature alert.
To fi nish, press once more on the ALERT button.

BACKLIGHT SETTING

- If operated from a battery supply, the backlight
is switched off by default. You can switch it on
by pressing the SNOOZE/LIGHT button. The
weather station will be backlit for 5 seconds.
- If operated from the mains supply, the backlight
is switched on by default, without a time limit.
You can adjust the brightness or switch it off
completely by pressing briefl y and repeatedly on
the HPA/INHG button.
10
EN
LED
u . e i t y u r e c n s s o m o t h w . w w
WIRELESS WEATHER STATION

MOON PHASE

The moon phase is calculated and displayed
automatically according to the date and year. It
is therefore essential that the date and year are
correct. (See DATE and TIME SETTING)
New First
moon crescent
Full Gibbous
moon moon
First Gibbous
quarter moon
Last Last
quarter crescent