ENGLISH
IMPORTANT SAFETY INSTRUCTIONS –
!
PLEASE SAVE FOR FUTURE REFERENCE
Thank you for purchasing this Daylight product. To register your purchase and read more information
about your guarantee, please go to www.daylightcompany.com To ensure correct and safe operation
please read the following and retain for future reference.
SET-UP AND OPERATION
1. Remove all packaging from around the lamp.
2. Connect the power adapter jack to the connector at rear of the base and plug into a suitable
electrical socket.
3. Switch the lamp on by touching the
allows the 3 different brightness levels and OFF to be selected.
5. The main lens can be rotated allowing the higher magnification inset lens to be positioned as
required.
CAUTION: DO NOT LOOK DIRECTLY AT THE LEDS.
CLEANING
BEFORE CLEANING MAKE SURE THE LAMP IS DISCONNECTED FROM THE ELECTRICAL
SUPPLY.
If the lamp requires cleaning simply wipe with a damp cloth. Do not use large amounts of liquid or
spray cleaners as they may enter the shade and affect electrical safety.
MAINTENANCE
No maintenance is required. The LEDs are not user or service replaceable as they are designed to last
for the lifetime of the product.
SAFETY
FOR INDOOR USE ONLY
CAUTION: NEVER LEAVE THE LENS UNATTENDED IN DIRECT SUNLIGHT OR WHERE LIGHT CAN
SHINE THROUGH IT - THIS CONSTITUTES A FIRE HAZARD. WHEN THE MAGNIFYING LAMP IS
NOT IN USE PLEASE CLOSE THE LENS COVER FITTED TO THE LAMP.
CAUTION: DO NOT LOOK DIRECTLY AT THE LEDs.
CAUTION: Only use the power adapter supplied with the product. Use of a different adapter could
damage the lamp and invalidate the guarantee.
CAUTION: Take care not to get the flexible cable tangled around the base.
CAUTION: If the cable of this luminaire becomes damaged, it should be exclusively replaced by a
suitably qualified person in order to avoid hazard.
IN CASE OF DOUBT CONSULT A QUALIFIED ELECTRICIAN
symbol on the base. Subsequent touches of the symbol
1