Velleman WT302 Guia De Inicio Rapido

WT302 -- MULTIFUNCTIONAL CLOCK
1. Introduction
Thank you for buying the WT302 ! This multifunctional clock does much more than merely display the correct time !
This device is also equipped with several other functions : a calendar, an alarm, a snooze function, a stopwatch, a
countdown timer and a temperature read-out.
2. Features
Normal display mode : Hours, minutes, date, month, day of the week and temperature are displayed. Range for
Alarm/snooze mode : Set the alarm and press an arbitrary button while the alarm is sounding to activate the
Stopwatch : Put the left-hand selector at the back in the TIMER position and press MODE. Max. count
Countdown timer mode : Put the left-hand selector at the back in the TIMER position and press MODE. Max.
Time display mode : 12h- or 24h-mode.
Thermometer : Displays the temperature in °C or °F.
3. Battery
Open the battery compartment at the back and insert the included CR2025 battery (3V). The battery's positive pole
should face upwards! Replace the battery when the digits on the display are no longer clearly legible.
4. Setting the Clock
Place the left-hand selector at the back of the device in the T•SET position. The digits for the hours start to flash.
Note that the digits will change faster if the UP or DOWN button is held Enter the hours with UP or DOWN and
confirm them by pressing the MODE button. The digits for the minutes start to flash. Enter the minutes with UP or
DOWN and confirm with MODE. The digits for the year start to flash. Enter the year (1900-2099) with UP or DOWN
and confirm with MODE. The digits for the month start to flash. Select the month with UP or DOWN and confirm with
MODE. The digits for the date start to flash. Enter the date with UP or DOWN and confirm with MODE. Note that the
day of the week is adjusted automatically. Place the left-hand selector at the back in the NORMAL position to leave
the time setting mode. Note that the
mode is selected.
5. Alarm and Snooze Function
Hold the MODE button in the normal display mode to display the current alarm time. Place the left-hand selector at
the back in the AL•SET position. The current alarm time is displayed and the digits for the hours are flashing. Enter
the hours with UP or DOWN and confirm with MODE. The digits for the minutes start to flash. Enter the minutes with
UP or DOWN and confirm with MODE. The digits for the snooze delay snooze activation delay start to flash. Enter
the delay with UP or DOWN (1 to 60 minutes) and confirm with MODE. Note that the
display as soon as the alarm setting mode is activated. Use the right-hand selector at the back to select one of three
available alarm functions :
WT302
the year setting : 1900 to 2099.
snooze mode (right-hand selector at the back in SNZ position).
is 29h 59min 59sec.
countdown is 29h 59min 59sec.
symbol is always displayed on the central display if the normal time display
1
symbol appears on the
VELLEMAN