Monster Power Signature PRO AVS2000 Manual Del Propietário página 14

1. Digital "Output/Input Voltage" Meter: Indicates Output or Input voltage.
2. Digital "Voltage Correction" Meter: Indicates the amount of voltage being increased or decreased
in an effort to maintain a consistent 120 volts.
3. Digital "Current Usage" Meter: Indicates amperage draw.
4. "Ground OK" Indicator: Indicates the Signature PRO AVS 2000 is properly connected to a grounded wall outlet.
5. "Surge Protected" Indicator: Indicates the Signature PRO AVS 2000's internal surge protection circuit is active.
6. "Line and Neutral OK" Indicator: Indicates that the Signature PRO AVS2000's L-N line is correctly wired to a wall outlet.
7. "Normal Voltage Condition" Indicator: Indicates power is between 80 volts AC and 140 volts AC.
8. "Switched On" Indicator: Indicates power is being supplied to the switched outlets.
9. "Abnormal Voltage Condition" Indicator: Indicates the incoming voltage is below approximately 80 volts AC or
above approximately 140 volts AC.
10. "Sequential Power ON/OFF" Switch: Once the Automatic Voltage Stabilizer is plugged into a properly grounded
120 volts (nominal) outlet, pressing this button will provide AC power to the components plugged into the Automatic
Voltage Stabilizer's Switched (Timed) outlets. Pressing this button again will turn off the Switched (Timed) outlets.
(Unswitched outlets remain on at all times.)
11. "Input Voltage and Display Dimmer" Button: Indicates output voltage meter (press and release).
Adjusts the brightness of the digital meters (press and hold).
12. Switched Outlets: Power is delivered to these outlets only when the Signature PRO AVS 2000 is on.
13. Unswitched Outlets: Power is delivered to these outlets even when the Signature PRO AVS 2000 is off.
6
MONSTER POWER SIGNATURE PRO AVS2000 FEATURES