Directions For Use - LTR HV 90 Manual De Instrucciones

Directions for use

GB
Pressure and Vacuum Pump HV 90
The Pressure and Vacuum Pump HV 90 is a gasoline resistant all-metal pump. Using this pump, you can test any difficulties you encounter
with pressure or low pressure on the vehicle. The measuring range of the compound gauge's double precision scale is subdivided as follows:
Minus range -1 to 0 bar/760 mmHG, plus range 0 to 3 bar/42 psi. (2)
A pressure hose (3), a brass conical adaptor (4) as well as 4 more connectors are standard supply.
Version HV 90.6 (060107_6) including collecting tank, see illustration overleaf.
Work according to safety instructions of automobile trade!
! When using the Pressure and Vacuum Pump HV 90, please make sure that no liquids such as water
or oil get into the pump's interior.
Test procedure:
. Connect pump with the vehicle part using the suitable connector.
. Resetting is effected by pushing the front switch ring (1) backward or forward.
A) switch ring pushed forward j vacuum range
B) switch ring pushed back
Fields of Application:
Vacuum Position
Control of the Exhaust Gas Recirculation Valve
Control of the autostarter throttle valve
Control of gas pressure regulator
Control of the automatic transmission vacuum modulator
Control of a power brake diaphragm
Maintenance:
Joints and cylinder have to be oiled from time to time in order to increase the device's service life.
Technical Data:
Compound gauge:
Pressure hose:
Adapter:
Dimensions plastic case L/W/H:
Pressure and Vacuum Pump:
Technical modifications reserved
j pressure range
DS 63 mm, graduation 0.1 bar
length 0.50 m (19.7 in.) with conical plug adaptor
4 plastic connectors (Ø 6x4, 6x6, 6x8, 6x10 mm)
380/280/90 mm (15/11/3.5 in.)
Weight 900 g
Pressure Position
Control of the injection pump diaphragm
Control of the turbo overfeeding pressure
05/2008