LEITZ Mini Mobile Guia Del Usuario página 6

Controlling audio reproduction
Audio reproduction via Bluetooth or microSD card can be controlled
in the following manner:
Objective
Start/stop playback
Skip to the next track
Skip to the previous track
Adjust the volume
Switch between microSD
card and AUX IN
Audio reproduction over wire connection
You can also use the speaker if your audio source does not have
Bluetooth or there is no Bluetooth connection. Use the supplied cable
for this purpose.
1. Connect the 3.5-mm mini jack of the cable to the headphones or
line output of your audio source.
2. Connect the mini USB plug of the cable to the mini USB connector
on the speaker.
3. Slide the main switch to the MP3 position.
4. Operate your audio source as usual to control playback. To adjust
the volume, use the arrow buttons as explained below.
Note: The speaker cannot control the audio source via the cable con-
nection. It only reproduces the audio signal received via the cable.
6
Action
Press the "Play/Pause/Phone" button.
Press the right arrow button (>).
Press the left arrow button (<).
Press and hold the appropriate arrow button
(< or >).
Press and hold the "Play/Pause/Phone" button
for two seconds.
EN