Prevention Of Accidents At Home - TEFAL GRILL'N PACK Manual De Instrucciones

Thank you for buying this TEFAL
appliance, which is intended for domestic
use only. Read the instructions in this
leaflet carefully and keep them within
reach. They apply to every version
depending on the accessories that come
with your appliance (NB: the parts with
a * in front of their reference number are
only delivered with certain models).
For your safety, this product conforms to
all applicable standards and regulations
(Low Voltage Directive, Electromagnetic
Compatibility, Food Compliant Materials,
Environment, ...).
The appliance is suitable for outdoor use.
TEFAL has an ongoing policy of research and
development and may modify these products
without prior notice.
The drawings shown on page 2 illustrate
the instructions.
Any solid or liquid foodstuff that comes
into contact with the parts marked with
GB
the logo should not be consumed.
Prevention of
accidents at home
This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless
they have been given supervision or
instruction concerning use of the appliance
by an adult responsible for their safety.
Children should be supervised to ensure
that they do not play with the appliance.
• Accessible surface temperatures can
be high when the appliance is
operating.
• Never touch the hot surfaces of the
appliance.
Assembly
Open the appliance by raising the two clips
A
(1).
Open the protection lid (2) until it locks in
the open position.
If the lid is closed, a device (6a) prevents
the appliance switching on.
18
B
D
* Depending on the model, remove the
storage shelf (*12).
Before first use:
• Remove any packaging, stickers or
accessories inside and outside the
appliance.
• Clean the grill plate or the grid (4)
(depending on the model): follow the
instructions in the section "After use".
Place the reflector (7) in the base of the
appliance (8): the curved part of the
reflector (7a) must be positioned towards
the front. D
Place the heating element (5) on the
reflector (7) then press firmly on the control
panel (6) to position it in the housing
provided for this purpose, so that the safety
system is activated.
If the heating element is incorrectly
positioned, the safety system will
prevent the appliance from working.
Position the grill plate or the grid (4)
(depending on the model) on the appliance
(the pattern 4a must be placed on the back)
and lock it in place using the two handles
D
(3).
* Depending on model :
• Take out the support legs (*11) stored
underneath the storage shelf (*12).
• Insert the support legs (*11) into the
storage shelf (*12).
• Turn over the storage shelf (*12) and then
open the two supports (*13).
• Place the barbecue on the two supports
E/4
(*13).
Make sure that the lugs (*14) are
correctly fitted into the slots (*15)
underneath the appliance.
Connection
and pre-heating
It is essential to pour 4
litres of water into the base
of the appliance (8) to
ensure that the barbecue
D
works properly.
C
D
E/1
E/2
E/3
E/4