Initial Setup - multicomp pro MP001189 Manual De Instrucciones

INSTRUCTION MANUAL
Digital Timer Switch Socket TM-02
This domestic plug-in timer switch socket can control On/Off switching of connected appliances according to the
user-programmed times. An internal rechargeable battery backs up all settings. If the LCD is blank, please plug product into the
mains socket to recharge for about 5 ~ 10 minutes before operation.
Features
• 10 ON & 10 OFF commands.
• Single Switching Day and groups of days use one command. (Max 70 ON & 70 OFF commands per week)
• 1 minute ~ 7 days timing range.
• 12 / 24hour clock format
• Summer time (DST)
• Manual / Timed / random switch operations

1. Initial Setup

Use pointed tool (such as a paper clip) to press the RESET button to clear all settings. LCD will appear as
Figure 1, then change to clock mode as Figure 2 automatically.
2. Set clock
2.1 Press CLOCK button to enter clock mode.
2.2 Press and hold CLOCK button, and press WEEK button to set day, then press HOUR button to set hour, press
MINUTE button to set minute. Release Clock button when correct time is set.
2.3 Press CLOCK and TIMER buttons together to choose 12 or 24-hours' time format.
2.4 Press CLOCK and ON/AUTO/OFF buttons together to select summer time (DST), LCD will show SUMMER.
3. Set On/Off Switching Times
3.1 Unplug the timer socket from mains power, then press TIMER button to enter the timing set mode.
3.2 Press WEEK button to cycle through and select day or group of days in the sequence below;
Single day: MO -> TU -> WE -> TH -> FR -> SA -> SU.
Every day: MO TU WE TH FR SA SU. -> Week day: MO TU WE TH FR.
Weekend: SA SU -> Exclude Sunday: MO TU WE TH FR SA.
Other days: MO WE FR -> TU TH SA -> MO TU WE -> TH FR SA -> MO WE FR SU.
3.3 Press HOUR button to set hour. Press MINUTE button to set minute.
3.4 Press RES/RCL button to delete or restore the last setting.
3.5 Press TIMER button again to move to the next command and repeat steps 3.2 - 3.4.
Newark.com/multicomp-pro
Farnell.com/multicomp-pro
Element14.com/multicomp-pro
Page <2> 04/03/20 V1.0