Feiss Wellfleet 1 Light Outdoor Post Instrucciones De Instalación

Installation Instructions for
Wellfleet 1 Light Outdoor Post
Outdoor
G ENERAL RODUCT NFORMATION P
This product is safety listed for wet locations.
This product may be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
1A
1 Connect the fixture to a suitable ground in accordance to local electrical codes.
2 Connect the white fixture wire to the neutral power line wire with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
3
4 Secure the fixture to the post with the post screws making sure to neatly tuck in all wiring.
5 Insert the shade into the frame and place it over the socket.
Screw the lamp into the socket. Refer to the label on the socket for Max Wattage information.
6
7 Secure the shade in place by installing the threaded pipe assembly to the frame using the screws.
8 Place the cover over the threaded pipe and secure it in place by screwing on the finial.
I :
COVER
SCREW
THREADED PIPE
ASSEMBLY
POST SCREW
3
POST
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
FINIAL
LAMP
SHADE
FRAME
4 4
2
1
OL10907
CAUTION - RISK OF FIRE
OL10907
1.1