Chauvet DJ Data Stream 4 Guía De Referencia Rápida página 3

Data Stream™ 4 QRG
Description
Overview
AC Power
Fuse Replacement
DMX Linking
The Data Stream™ 4 is a universal DMX-512 optical splitter designed to
distribute/boost the incoming DMX signal into 4 separate outputs. Each of the 4
outputs is electronically isolated from the others, with the exception of the DMX
Thru (throughput) or Link Out. Each output has 3- and 5-pin XLR ports. Increase
operation by linking other Data Stream™ 4 units together.
DMX In
DMX Signal
3- and 5-pin
Indicator
Indicator
Data Stream™ 4 has an auto-ranging power supply that works with a voltage
range of 100–240 VAC, 50/60 Hz.
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the fuse holder from its housing.
4. Remove the blown fuse from the clip on the front of the safety cap and
replace with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
Disconnect the product from power before replacing the fuse.
The Data Stream™ 4 works with DMX controllers. For information
about configuring Data Stream™
download the
http://www.chauvetlighting.com/product-manuals-literature/. For information about
DMX download the CHAUVET® DMX Primer, from the CHAUVET® website:
http://www.chauvetlighting.com/downloads/DMX_Primer_rev05_WO.pdf.
Link Out/DMX
Throughput 3- and 5-pin
Power
M8
Mounting
Hole
4
User Manual from
3
Ears for
Rackmount
DMX Out
3- and 5- pin
Power In
Fuse Holder
for additional DMX operation,
the CHAUVET®
EN
Front
View
Rear
View
website: