Brigmton BD-516-B-N Guia De Inicio Rapido página 6

•
The Time Setting Mode will automatically exit in 15 seconds without any adjustment.
12/24 Hour Display mode:
Press " " button (B4) to select 12 or 24 hours mode.
Thermometer:
Press " " button (B3) to select Temperature to be displayed in Celsius mode or Fahrenheit
mode.
Snooze Alarm Clock Function:
Press "MODE/SET" button (B2) to select to view :
Time Alarm Time ("AL "Shown on screen)
When viewing the Alarm Time, hold "MODE/SET" button (B2) for 3 seconds to enter Alarm
Time setting. Press "
Push the "Alarm ON/OFF" slide switch (B7) to switch alarm on or off. If it is on, "
the LCD.
When alarming, press "SNOOZE" button (B1) to activate the snooze alarm. The alarm will
snooze for 5 minutes, then it alarms again. This snooze function can be enabled for maximum
7 times. If the snooze function is activity, the " " icon will flash.
Press any button to stop the snooze alarm.
Back Light and projection
Press "Snooze/Light" button (B1) to turn on the back light and projection 5 second.
When the unit power supplied by DC adaptor, push "Projection stand by/on" slide switch to "on",
the projection and back light will turn on. Push the switch to "stand by", press "Snooze/Light"
button (B1) will turn on the back light and projection 5 second.
Note:
Remove batteries and insert again to reset the unit if the Unit does not work properly.
All Setting mode will automatically exit in 15 seconds without any adjustment.
" button (B4) or " " (B3) buttons to adjust the alarm time.
" shown on