ANLAN C-105 Manual Del Usuario página 6

③ After use, wash your face and spatula to remove the sebum and oil,
then wipe it off with a towel or cloth.
※ Parts other than the spatula head cannot be washed by water.
Ion+： Ultrasonic Vibration + Ion export
① After washing, wet the face skin with water or make-up water.
※ Never use the device on dry skin.
② Press the on / off button to start the machine. Briefly press the button
and select the ion+ mode. Hold the ion conducting bar, carefully
attach the spatula to the skin at an angle of about 30-45 °and move it
over the face in the direction of the arrow.
※ The blackhead of the nose and the care of the dirt part should focus
on, it is recommended to adjust according to their skin condition.
※ The spatula cannot be used on the same part of the skin for a long
time and must be moved constantly when it is used.
7>
③ After use,wash your face and spatula to remove the sebum
and oil, then wipe it with a towel or cloth.
※ Depending on the brightness of the room, the water mist generated
by the vibration of the spatula head will be different.
Ion-： Ultrasonic Vibration + Ion Import
① After removing makeup and washing your face, apply mask or
moisturizer on the skin.
※ After using the ION - mode, it will facilitate the penetration of the
beauty ingredients.
Move forward
to push
30-45°
skin
Move forward
to push
30-45°
skin
8>