Care And Maintenance - Allen + Roth LG-3098-CHT Manual De Instrucciones

4. Secure the complete side panel (A)
assembly where shown using short bolts (AA),
long bolts (BB) and washers (CC). Hand
tighten only.
Hardware Used
Short Bolt
AA
Long Bolt
BB
CC
Washer
5. Assemble side panels (A) to top (B) using
long bolts (BB) and washers (CC).
Check alignment of all hardware and make
any necessary corrections. Then, securely
tighten all bolts with hex wrench (EE).
Cover all bolts with bolt covers (DD).
Hardware Used
Long Bolt
BB
CC
Washer
Bolt Cover
DD
EE Hex Wrench

CARE AND MAINTENANCE

• Clean frame with a solution of warm water and mild soap. Dry completely. Do not use bleach
or solvents. Use a fine automotive wax to maintain gloss on non-textured finishes.
• The finish on furniture is formulated and baked on to make it highly resistant to repellents and
lotions. However, to avoid discoloration, clean the frame as soon as possible after exposure.
• For best results, clean weave regularly with mild detergent and warm water. Cleaning will help
prevent mildew by washing out dirt particles that may become trapped. Shake out excess
moisture after rinsing and allow to dry thoroughly before storing.
4
x 2
x 2
x 4
CC AA
5
A
x 4
x 4
x 12
x 1
4
Lowes.com/allenandroth
BB CC
CC
BB
DD
BB
B
CC
A
AA CC