Publicidad
Idiomas disponibles
Idiomas disponibles
9.
230 VAC grounded plug.
10. Fuse
11. Output terminals: 50 A max. Red: positive (+), Black: negative (-)
12. Cooling fan
Input voltage
Output voltage
Protections
Max. Output current
Fuse
Meter
Dimensions
Weight
Install the unit in a stable place, dry, ventilated, no direct sunlight and far from flammable
materials.
Use correct terminals to connect cable.
When plugging the unit into a wall outlet, it must be turned off.
Place the unit in a dry a well ventilated area.
Never touch the unit while it is working. Even though it is designed for high efficiency, the unit
will still get hot.
A current limit system will protect the unit from overloading.
If a short circuit occurs while outputting, the unit will be protected by a short circuit protection
function. Turn off the unit and repair the cause of the short circuit immediately. Then turn it back
on.
Do not use the unit for devices that require high current input at start, such as motorized
equipment. Do not use the unit to charge a car battery.
Do not use a car cigarette lighter in the cigarette plug.
Before replacing a fuse make sure that the unit has been turned off. Be sure to use the specified
type of fuse.
Make sure the product is always suitably grounded to prevent electric shock and to reduce noise.
Never disassemble, modify and touch the inside of the unit unnecessarily. That could cause
damage to the product and make the warranty invalid.
Do not operate this unit with wet hands.
Do not obstruct rear cooling fan.
BACK
SPECIFICATIONS
220 VAC
13.8 V
Short-circuit / Overload
50 A
8 A
Voltage / Current. Backlit
195 x 85 x 280 mm.
2.5 Kg.
CAUTION
Publicidad
