Tabla de contenido
Publicidad
Enlaces rápidos
Publicidad
Tabla de contenido
Resumen de contenidos para Studio Designs ERGO PRO CHAIR 18409
- Página 1 Thank you for purchasing our Studio Designs, Inc. Gracias por comprar nuestro mueble Studio Designs, Inc. Merci d’avoir acheté un meuble Studio Designs, Inc. ERGO PRO CHAIR Model #18409 Black Modelo #18409 Negro Modèle #18409 Noir Product Support: 866.942.0492 Office: 562.942.0492...
-
Página 2: Instrucciones Para Armar - Importante
ASSEMBLY INSTRUCTIONS - IMPORTANT: Carefully unpack & identify each component before attempting to assemble. Refer to parts list. Please take care when assembling the unit and always set the parts on a clean, soft surface. If you require any assistance with assembly, parts, or information on other products, please visit our website: www.studiodesigns.com or call or write us. - Página 3 PARTS LIST / LISTA DE PARTES / LISTE DES PIÈCES DÈTACHÉES DESCRIPTION / DESCRIPCIÓN / DESCRIPTION QUANTITY / CANTIDAD / QUANTITÉ Bellows Fuelle Soufflets Foot Ring Aro para pies Repose-pied Base Base Base Washer Arandela Rondelle Caster Ruedas Roulette Backrest Bar with Bellows Barra de Respaldo con Fuelles Barre de Dossier avec Soufflet Backrest...
-
Página 4: Rondelle De Frein
PARTS LIST / LISTA DE PARTES / LISTE DES PIÈCES DÈTACHÉES DESCRIPTION / DESCRIPCIÓN / DESCRIPTION QUANTITY / CANTIDAD / QUANTITÉ Lock Washer Arandela de traba Rondelle de frein Allen Bolt - 6mm x 20mm Bulón Allen - 6mm x 20mm Boulon Allen - 6mm x 20mm Lower Bellows Fuelles inferiores... - Página 5 • Place Base (7) face down and push Casters (9) in firmly. • Slide Foot Ring (6) over Extension Tube (3) and secure with attached Knob. • Slip Lower Bellows (15) over Extension Tube (3) under Foot Ring (6), insert smaller end of Extension Tube (3) into Base (7).
- Página 6 • Place Backrest Support Bar (10) into recessed groove in Metal Plate (1). • Attach using Lower Adjustment Knob (4), Washer (8) and Lock Washer (13). This knob allows adjustment of Backrest from front to back. • Coloque la Barra de Soporte del Respaldo (10) en el surco en la Placa de Metal (1). •...
- Página 7 • Place the completed seat assembly on top of Gas Lift (2). • Sit on the chair and gently bounce up and down on the seat a few times to tighten the pressure fit of the gas lift into the seat. •...
-
Página 8: Garantía Limitada
GARANTIE LIMITÉE Studio Designs (la « Compagnie ») garantit à l’acheteur original que ce produit sera exempt de tout défaut de fabrication et matériel s’il est utilisé à la maison et dans des conditions d’exploitation normales, tel que décrit à la présente. La Compagnie réparera ou remplacera, à...