Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

NOTE:
1. There may be an odor or smoke during initial use. This is normal. It is due to the
protective substance on heating elements, which avoids salt effects during shipping
from the factory. It is recommended to operate the oven dry for about 15 minutes
the first time. Ensure the room is properly ventilated.
2. The minimum distance between the food and the upper heating element should be
at least 1.25 inches, for uniform baking.
3. The baking pan can only be used when installed on wire rack.
Toasting
1. Rotate the Temperature controller clockwise to the "toast" position, and the heating
elements will turn on. Open the oven door and place the bread slice on the wire
rack. One slice of bread is placed in the center of the wire rack, or four slices side
by side. Four slices will be lighter than 1 slice – adjust Timer accordingly.
NOTE: Remember to first remove the baking pan for even toasting result.
2. Time setting
Turn the time controller to the corresponding position depending on the desired
bread color: dark, medium or light. Usually the time is in the range of about 3-5
minutes. The more toasting time, the darker the bread. When setting the timer dial
for less than 5 minutes, always rotate the timer to over 5 minutes and then rotate
back to your desired time. This will ensure a safe and accurate timer setting. To
interrupt the toasting process, turn back the timer to the "off" position. When the
timer has reached to the "off" position a bell sound will be heard to indicate the
completion of toasting, and the power will be shut off automatically.
NOTE: The bread may catch fire if the toasting time is set too long. Close supervision
is necessary during toasting.

HOW TO USE

3

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

4681131690461

Tabla de contenido