Product Package - rivacase VA2516 Manual Del Usuario

Thank you for purchasing the RIVACASE portable battery.
Read all instructions and warnings carefully before
using the RIVACASE portable battery.

Product package:

• RIVACASE portable battery
• User manual
• Micro USB cable
Specifications:
Model: VA2516
Battery: Li- Polymer 3.7 V
16000 mAh 59.2 Wh
Input: Micro USB DC 5 V 2.1 A
Type-C DC 5 V 2.1 A
Output: USB1 5 V 2.1 A
USB2 5 V 1 A
Size: 145 x 68 x 25 mm
Fully charged RIVACASE VA2516 is enough to charge most
smartphones up to 6 times or to charge most Tablets
up to 3 times (depending on the device battery capacity).
Safety protection
Over charge | Over discharge | Short circuit protection
Over current | Over Voltage
Operating instructions
Charge the external battery fully before the first use. Connect the cable to the Micro USB / Type-C
input port of the external battery. Connect the other end of the cable to the power source. You can
use PC, AC charger or car charger to charge the battery. We recommend using RIVACASE charger
with at least 12 W (2.4 A) output. Average full charging time is 7-8 hours.
The LED indicator shows the charge level during the charging of the RIVACASE battery. After
RIVACASE battery is fully charged, 4 LED indicator lights are constantly on. Disconnect the cable
from the battery when charging is complete.
To charge the mobile device, connect it to the output port of the RIVACASE battery using the cable.
Charging will start automatically, and the indicator will show the remaining charge of RIVACASE
battery. Disconnect the cable from the battery when charging is complete.
We do not recommend keeping RIVACASE battery discharged, as it might be damaged. Press the
button to check the battery charge level.
Micro USB Input
Check button with
LED Indicator
EN
Type-C
Input
USB 1
Output
LED status
USB 2
Output
Power Level