Publicidad
Idiomas disponibles
Idiomas disponibles
INSTRUCTION MANUAL
STAND FAN 16"
AV7702
PLEASE READ THE INSTRUCTIONS CAREFULLY OF THIS
MANUAL BEFORE STARTING.
DO NOT HANDLE THE FAN INTERNALLY.
The texts, photos, colors, figures and data correspond to the current technical
level from the moment they have been printed. We reserve the right to
modifications motivated by the permanent development of the technique in our
products
Thank you for your purchasing this fan. Please read all instructions carefully
and keep for future use.
Dear Customer,
Please read these operating instructions through carefully before connecting
your device to the mains, in order to avoid damage due to incorrect use.
Please pay particular attention to the safety information. If you pass the device
on to a third party, these operating instructions must also be handed over.
STRUCTURE
1. Front guard
2. Fan blades
3. Guard mounting nut
4. Back guard
5. Motor shaft
6. Motor housing
7. Oscillating knob
8. Switches
9. Swicht compartment
10. Lock sprain
11. Upper pipe
12. Pipe connector
13. Lower pipe
14. Round base
ASSEMBLY
1. Secure lower pipe with Pipe support to the
hub of Cross Base with screw provided.
2. Extend upper pipe, insert the pipe connector through
upper pipe onto lower pipe and tighten.
3. Attach the motor with switch compartment onto the
upper pipe. Ensure the switch compartment is pushed fully onto the upper
pipe and secured with the screw provided.
4. Loosen Guard Mounting Nut from the Motor Housing.
5. Position Back Guard firmly to Motor Housing and then fasten by turning
Guard Mounting Nut clockwise tightly.
6. Push the Blade along Motor Shaft and fasten firmly with the Blade.
7. Hang the Front Guard to Back Guard with the position fixer provided at the
rim of Guard, and then fix together with clips provided.
OSCILLATION CONTROL
1. Push the oscillation knob to oscillate.
2. Pull the oscillation knob to stop.
CAUTION
1. Read and retain these instructions for future use.
2. Improper installation may result in the risk of fire, electric shock, or serious
injury to persons.
3. Power plug must be removed from power socket before cleaning, servicing,
maintenance and when moving from one location to another.
4. The fan should be placed on a flat and stable surface when operating to
avoid overturning.
5. The fan should not be placed in a damp place or where humidity is high
(such as in a bathroom).
6. Do not insert fingers or other objects through the fan guard.
7. Unplug from mains if not in use.
8. This is not a toy. Keep out of reach of children.
9. The appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction
concerning the use of the appliance by a person responsible for their safety.
10. Children should be supervised to ensure that they do not play with the
appliance.
11. If the cord is damaged, it should be replaced by service agent or qualified
technician.
12. Please check that the voltage indicated on the product corresponds
with your supply voltage.
13. The fan should be used in the house.
MAINTENANCE AND CLEANING
Before cleaning, make sure that the appliance is disconnected from the
network and the blade completely stopped.
You can clean the outside with a slightly damp cloth.
If you want to clean the interior parts before you must remove the front
grille.
To do this, take it disassembly of the hooks, once extracted proceed to
clean and reassemble.
Clean the interior with a slightly damp cloth, except for motor that should
always be wiped with a dry cloth.
Do not use chemical products or abrasive, scourers metallic etc. that can
damage the surfaces.
If you do not have to use the fan for a long period of time, clean it and store
it in a plastic bag or in a box.
Clean the interior with a slightly damp cloth, except for the motor that
should always be cleaned with a dry cloth.
Do not use in chemical or abrasive cleaners, while polishing metal blocks
etc. this can deteriorate the surfaces.
PRECAUTIONS
Read these instructions sincerely before you start the fan. Do not leave
within the reach of children's plastic balls orpacking.
CONNECTION TO THE MAINS
Please check that the voltage indicated on the product corresponds with
your supply voltage.
Disposal Information
Disposal of old electrical appliances The European Directive 2002/96/EC
on Waste Electrical and Electronic Equipment (WEEE), requires that old
household electrical appliances must not be disposed of in normal
unsorted municipal waste. Old appliances must be collected separately
in order to optimise the recovery and recycling of the materials they
contain and reduce the impact on human health and the environment.
The crossed out "wheeled bin" symbol on the product
reminds you of your obligation, that when you dispose of
the appliance it must be separately collected. Consumers
should contact their local authority or retailer for information
concerning the correct disposal of their old appliance.
SPECIFICATIONS
Model:
AV7702
Voltage
220-240 V~ 50Hz
Maximun Power::
40 W ± 5 %
Protection Class:
II
Publicidad
