Connecting To Power; Basic Operations - Braun B-BOX T6 Manual Del Usuario

car.
② With the dash cam attached to the mount, removing the protective tape from the back
of the mount.
③ Attach the adhesive side of the mount on the windshield where it will not obstruct the
driver's view.
④ Hide the power cable by placing it in the space between the windshield and headliner.
Recommended locations for the adhesive wire clips to arrange the power cable.
Tips: To ensure that the mount is safely secured, it is recommended that you separate the device
from the mount after installation and press the mount towards windshield for 5 minutes to
maintain pressure. Allow 24 hours until the adhesive on the mount has set before connecting the
dash cam.
3. Connecting to Power
① Connect the power cable to Mini USB port of the dash cam.
② Plug the car charger adapter end of the power cable into a vehicle power socket.
Basic Operations
1. Insert a Micro SD Card
· Support up to 32G Class 10 UHS‐I Suggested, sold separately.
· To keep your Micro SD card in good condition, please reformat it regularly.