Troubleshooting Guide - PALSON Quasar Modo De Empleo

Caring for the blades
1. Hold the hair trimmer and push
the top of the blade unit out of its
holder.
2. Using the brush, clean the blade
unit in order to remove any hair
that may have been caught
between the blades; lubricate
the space between the fixed and
moving blades with 2 or 3 drops
of oil after every few uses.
3. To reassemble, set the scale to
2.0; push the blade block until
it clicks firmly into the position
indicated by the arrow.
CAUTION
1. To clean the stand, use only a cloth slightly
dampened with water or a mild soap solution.
Never use caustic solutions.
2. Never immerse the hair trimmer in water.
3. Keep the hair trimmer out of children's reach.
4. The hair trimmer may become hot during
operation or charging; this is normal.
5. Never handle moving parts.

TROUBLESHOOTING GUIDE

1 The blade cannot be inserted
2 The hair trimmer cannot be used at full power
3 It does not charge
4 The hair trimmer does not work
Thank you for choosing one of our products.
Make sure that the measuring ring is at 2.0 mm.
Insufficient charge. Recharge or use the mains connection.
1) The battery is fully recharged
2) The adapter has a malfunction
1) Make sure that the blade is properly fitted
2) The battery is depleted. Recharge or use the mains connection.
3) The motor's internal circuit is broken; send to the service centre for
repair.
7