Publicidad
Idiomas disponibles
Idiomas disponibles
4
7. Remove five (5) 8mm nuts across the inside center of the trunk lid. Loosen the four remaining 8mm nuts on the
far right and left side of the lid without fully removing. Disconnect the 6-way plug on the right side of the trunk lid.
9X
8mm
8. Press in on the two release tabs behind the lamp assemblies on both sides of trunk lid. Carefully remove the
rear light applique assembly from the trunk lid.
9/4/12
PRESS
RELEASE
TABS
2X
K6861594
Publicidad
