4. Align side holes of remaining back brace with top
holes of the back leg.
5. Secure back brace to the back leg by using a
2/" carriage bolt, washer and lock nut. Repeat for
opposite side. (See Figure 3)
Figure 3
2/" Carriage Bolt
Back Leg
6. Pull the front leg out from the unit as shown.
(See Figure 4)
Figure 4
PAGE 2 OF 6
ASSEMBLY CONTINUED
Back Brace
Lock Nut
Washer
Front Leg
1-800-295-5510
uline.com
7. Attach one leg brace to back leg and front leg using
two 2¼" carriage bolts, two washers and two wing
nuts. Repeat for remaining leg brace. (See Figure 5)
Figure 5
NOTE: Additional hardware can be used to
install eyewash station. Mounting bracket is
included with the eyewash station.
NOTE: When attaching an eyewash station,
refer to the installation instructions included
with the unit.
Leg Brace
1121 IH-5193