Tool Specification; Part List; Intended Use - IVT CS-140 Manual De Instrucciones

Tool specification

model
Voltage/Frequency [V~Hz]
Rated power [W]
No-load speed [RPM]
Sound pressure level [dB(A)]
Sound power level [dB(A)]
K
Blade diameter Ø [mm]
Bore Ø of saw blade [mm]
Thickness of saw blade [mm]
Max. cutting depth 45° [mm]
Max. cutting depth 90° [mm]
Weight [Kg]
Safety class

Part list

1. Dust extraction outlet
2. Cutting depth ruler
3. On/Off switch
4. Saw blade safety casing
5. Auxiliary handle
6. Case inclination ruler
7. Clamping screw of the parallel guide
8. Wing screw for angle adjustment
9. Base plate
10. Saw blade
11. Movable safety guard
12. Saw blade fixing bolt
13. Outer flange
14. Parallel guide
15. Ventilation slots
16. Lock-off button
17. Clamping screw of the cutting depth ruler
18. Spanner
19. Pin- Spanner
20. Clamping screw of the base plate
21. Inner flange

Intended use

This model row of circular saw is intended for sawing wooden
workpieces. The machine is only suitable for right-hand use.
Safety regulation for the use
General safety rules
The following listed safety instructions should serve you for the
CS-140 CS-160
230~50 230~50
900 1200
4500 4500
94 97
107 111
3 3
140 160
16 20
2.5 2.5
28 32
45 52
3.63 4.37
II II
right use of the tool and for the protection of your own safety,
therefore, please read this very carefully.
When passing this tool to a third person, these instructions must
be handed too.
Retain this user manual and all other literature supplied with
your tool for any future reference.
Comply with all the safety information and the warnings on the
tool.
Be familiar with the controls and the proper use of the tool
before attempting to use it and above all, make sure you know
how to stop to use it in case of emergency.
Following these simple instructions will also maintain your tool
in good working order.
• The tool must be assembled correctly before use.
• Only use the tool for its designed purposes.
• On the tool, there may be also decals and further indications
about the safety equipment to use that must be considered.
The prevention of accidents is dependent upon the awareness,
common sense and proper training of everyone involved in the
operation, transport, maintenance and storage of the tool.
• Never leave the tool unattended.
• Never allow children to use the tool. Children should be
supervised to ensure that they do not play with the tool.
• Keep children and pets away. All onlookers should be kept
at a safe distance away from the tool when it is in use.
• The user is responsible for third parties while working with
the tool.
• People who aren't acquainted with the operating
instructions, children, juveniles who have not yet reached the
minimum age for using this tool and people under the influence
of alcohol, drugs or medication are not allowed to use the tool.
Local regulations may restrict the age of the operator.
The consumption of alcohol, medication and drugs, plus
13
Instruction manual
CS-185 CS-210
230~50 230~50
1500 1800
4500 4500
99 103
113 117
3 3
185 210
20 20
2.5 2.5
40 45
64 70
4.75 6.95
II II
WARNING
EN