DAYTEK 4 LINE Manual De Instrucciones página 4

OPERATING INSTRUCTIONS
IMPORTANT! This clothesline is self-tensioning. LEVER IS NOT TO BE USED AS A WINDING
MECHANISM. With lever in the UNLOCK position, the clothesline will self-tension. Once
line has self-tensioned, rotate the lever into the LOCK position.
1. Check that the handle
knob is pulled out
and the lever is in the
UNLOCK position.
2. Gently pull handrail out
from side of cabinet
and hook onto
brackets on the
opposite wall.
3. Rotate the lever
anticlockwise into the LOCK
position. Do not rotate handle
past the side tab. Push handle
knob inwards to lock into
position and secure the line.
Note: Moving the lever into the LOCK position will place some final tension on the line.
RE-TENSION LINE To re-tension line, move lever to UNLOCK position. Unhook handrail from bracket and
allow line to retract into unit. Pull handrail back out to position and hook onto brackets.
Re-position lever into the LOCK position and press handle knob to secure.
HANDLE
KNOB
LEVER
SIDE
TAB
PULL
HANDLE
KNOB
OUTWARDS
SAFETY HINT
Always return lever to the LOCK position
once clothesline is extended to final
position. Do not use clothesline other
than to hang and dry washing. Ensure
clothesline is not used as play item by
HANDRAIL
children swinging or hanging on lines.
PRESS
HANDLE
KNOB IN
TO LOCK
4
UNLOCK POSITION
LOCK POSITION