Camera Connection - Telstar TKC004110AS Manual De Instrucciones

TV with BNC Connector (VIDEO IN)
STEP 1.Connect DVR to monitor using a BNC-RCA cable
STEP 2.Connect monitor to power socket
NB:
This connection method is only used between DVR and a TV with a BNC and RCA port.

CAMERA CONNECTION

STEP 1.
Connect the camera cable BNC end (female) to
extension cable BNC end (male).
NB:
Camera cable power end (male) must connect to
the extension cable power end (female).
STEP 2. Connect the other extension cable BNC end
(male) to the DVR Video In socket (female).
STEP 3.
Connect the other extension power end (male) to
the power splitter cable end (female).
STEP 4.
Repeat above steps to connect other cameras
STEP 5.
Connect power splitter cable to the power
adaptor
STEP 6.
Plug the power adaptor into the mains socket.
You have finished connecting your CCTV system
1
3
5
20
DIGITAL VIDEO RECORDER
TKC004110AS
2
4
6