Master Trimmer MT Tumbler 200 Manual De Uso página 18

Attach the input hopper (C) on the trimmer (A),
3
holding the hopper over the trimmer and fitting it
into the two positioners.
To open the arms, pull them up and turn them
5
90°. Then fit the leaf collector bag (K) by sliding
the tapes over the leaf collector arms.
Push the buttons to start the barrel and the blade. Set the speed you want to use (if you have the adjustable
7
model).
18
ON (BLADES)
ON (TUMBLER)
OFF (TUMBLER)
Place the belt seal (E) on the leaf collector tube
4
between the trimmer (A) and the leaf collector (B).
Connect the leaf collector (B) and the trimmer
6
(A) to a power source (230 V/50 Hz single
phase). Read the checks that must be performed
before connecting.
OFF (BLADES)