Operating Instructions
C120HS
1. Place battery in headset and place headset in
2. Backup batteries may be bought and placed
The C120 must
be fully charged
STOP
for 8 hours before
first use.
FIGURE 1
3. On the top of the headset (receiver) there
4.
FIGURE 2
HOME
AWAY
5. There is a volume control wheel on the top
2.3 MHz
95 kHz
FIGURE 3
FIGURE 4
6
base to charge battery overnight. See Figure 1.
in the additional charging docks located on
the base. See Figure 2.
When the product is not in use, return the
headset to the base to recharge the battery
At full volume, the battery will last approxi-
mately four (4) hours.
is a switch labeled "HOME/AWAY." When
using the headset to listen to the television
with the included base, set switch to
"HOME." For use with public infrared
systems, set the switch to "AWAY."
See Figure 3.
When the headset arms are extended, the
unit automatically powers on. See Figure 4.
When the headset is removed from the head,
the arms will return to the "off" position.
of the headset where the volume may be
controlled easily. Turn the wheel in the
direction of the "+" to increase volume
and toward the "-" to decrease the volume.
See Figure 5 on page 6.
Further information can be found in the C110,
C115 or C120 Wireless TV Amplifier User Guide.
Operating Instructions
C120HS
FIGURE 5
Home
(For use with TV)
HOME AWAY
L
Away
(For use with public
infrared systems)
TECHNICAL SPECIFICATIONS
Weight: 1.75 ounces (49g) without battery, 2.05 ounces (58g)
including battery
Frequency Received: 2.3MHz and 2.8MHz from transmitter, 95kHz
from public IR systems.
Controls: "Home/Away" switch to set the headset to proper frequency,
volume wheel, tone and balance controls.
Amplified dB Level: 50dB, 125 dBSPL
Battery Type: Nickel Metal Hydride (NiMH), Rechargeable, weight
is 0.3 oz
Battery Life: Four (4) hour usage time, four (4) hour charge time,
lasts 500 charges.
R
INCLUDED
7