Kohler DTV Mode K-29201-CP Instrucciones De Instalación página 7

4. Install the Interface
Drip
Loop
IMPORTANT! Make drip loops in all cables.
Apply grease (provided) into both ends of the coupler and the adapter cable.
Connect the adapter cable to the coupler and to the cable from the interface.
Connect the cable from the wall to the coupler.
Make sure that all of the cables are clicked into place.
Feed the cables and coupler into the hole in the wall. Make sure a drip loop is
made.
Tilt the top of the interface onto the mounting bracket, then press the bottom until
it clicks into place.
Kohler Co.
Coupler
Adapter
Cable
7
1396161-2-C