HARNESS FEATURES
• Wiring harness for installation of an aftermarket radio
• Provides power and four speakers
• Retains balance and fade
• Provides NAV outputs (parking brake, reverse, speed sense)
APPLICATIONS
Hyundai
Accent†
2018-up
† Only for models with a Base "non-touchscreen" radio
Metra. The World's Best Kits.
®
Hyundai/Kia Wiring Harness
2017-up*
*Visit MetraOnline.com for up-to-date vehicle specific applications.
• Pre-wired ASWC-1 harness (ASWC-1 sold separately)
• Retains the factory AUX-IN jack
• Retains the factory backup camera
• Retains the factory USB
Kia
Rio / Rio 5-door†
2018-up
Sedona†
2017-up
Soul†
2017-up
MetraOnline.com
(with Base radio)
© COPYRIGHT 2018 METRA ELECTRONICS CORPORATION
70-7307
I N S TA L L AT I O N I N S T R U C T I O N S
TABLE OF CONTENTS
Connections ............................................................2
OPTIONAL ACCESSORIES (sold separately)
Steering Wheel Control Interface: ASWC-1
12V TO 6V Step-Down: AX-CAM6V
TOOLS REQUIRED
• Crimping tool and connectors, or solder gun,
solder, and heat shrink
• Tape • Wire cutter • Zip ties
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
REV. 7/30/18 INST70-7307