Technical Characteristics - Urmet 1071/15 Manual Del Usuario

situation as absence of drawn current and the
fluorescent light will consequently be on (unlike
the case described above).
6
In both cases, a linear or logarithmic type output
ramp can be defined.

TECHNICAL CHARACTERISTICS

Electrical characteristics
• Bus powered: 2.5 CU (if all four outputs are used
(2)
)
• Bus terminal configurable by means of jumper:
TERM
• Four output points:
- In 0-10V mode: 0-10Vdc output voltage
(1) In detail: CU = 1+0.375*N, where N is the number of outputs
used (N=1..4).
DS1071-009