Marmitek Sense MO Manual De Instrucciones página 2

Safety Instructions
Please read these instructions thoroughly before you
use the device and keep them for future reference.
• Only for indoor use.
• Do not expose the product to extremely high or low
temperatures, strong light sources or direct sunlight.
• This product is not a toy. Keep out of reach of
children.
• Dispose of batteries as chemical waste. Remove the
batteries when you are not using the system for a
longer period of time. Check the polarity (+/-) of the
batteries when inserting them in the product. Wrong
positioning can cause an explosion.
• Repairs or service should only be performed by
qualified personnel.
Requirements
This product requires a Smart me Zigbee Gateway (sold
separately) that is connected to the Internet.
Installation of the Smart me app
Download and install the Marmitek Smart me app from
the Apple app store or the Google Play store.
Launch the Smart me app after installation is completed.
Follow the instructions and register for a new account.
Installation of the Sense MO
• Open the housing of the Sense MO by the recess at
the back/bottom of the product (see image) and pull
the plastic battery strip to activate the battery.
• The connection status should start flashing rapidly. If
connection status is not flashing, press the reset
button for 5 seconds until it starts flashing.
• Launch the Smart me app from your smart phone or
tablet.
 Select the Smart me Zigbee Gateway.
• Click on the + (at the bottom of the screen) to add a
new product, confirm that the connection status is
flashing quickly and follow the instructions.
• Press Help button during installation for more
information or when installation fails.
Notes for using the product
• After the installation is completed you can configure
the Sense MO by using the app.
• Check our website
www.marmitek.com
details and how to use the Smart me products.
Technical specifications
Type
Detection range temperature -9.9
Detection range humidity
Battery life
Wireless technology
Operating range
Power
Standby current
Dimensions (h x w x d)
Connection status
Battery status
Temperature
Humidity
Recess
Declaration of Conformity
Hereby, Marmitek BV, declares that the
Sense MO is in compliance with the essential
requirements of the 2014/53/EU Directives.
Full Declaration of Conformity is available at
www.marmitek.com/en/declarations-of-conformity/
More detailed user guide and instructions are available
on our website at
www.marmitek.com
for more
Temperature & humidity
~ +55
0 ~ 95 % RH
1 year
Zigbee 3.0
up to 30 meters
Battery CR2450
<35 μA
62 x 60 x 14 mm
Ventilation
Reset
Battery holder
Recess
Ventilation
Bracket