Hillsdale Furniture 5690-826H Manual De Instrucciones

Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all
components are in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult assembly is required.
The product of Hillsdale Furniture, LLC is designed for residential use only. Customer Service Phone Number: 502-562-0000
HARDWARE LIST
A (11) 1/4" x 18 Allen Bolts
B (6) 1/4" x 35 Allen Bolts
C (17) Ø6.5*1.5 Spring Washers
D (15) Ø13 x Ø6.5 x 1.5 Flat Washers
E (2) Ø16 x Ø6.5 x 1.5 Flat Washers
F (1) Allen Wrench
PARTS LIST
G (1) Top Leg Panel
H (1) Bottom Leg Panel
I (1) Support Ring
J (1) Back
K (1) Seat Base
FIGURE 3
E E
D D
C C
C C
A A
B B
STEP 1 - Figure 1
Begin assembly by attaching Top Leg
Panel (G) to Bottom Leg Panel (H)
using 1 Bolt (A), 1 Spring Washer (C)
and 1 Flat Washer (D).
STEP 2 - Figure 2
Next insert Support Ring (I) in
between leg panels using 2 Bolts (A),
2 Spring Washers (C) and 2 Flat
Washers (D) per leg.
CARE & MAINTENANCE: The touch of a soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely tightened.
MARANO SWIVEL STOOL
Model #5690-826H Counter Stool
D D
C C
A A
FIGURE 1
J
FIGURE 4 FIGURE 4
K
Model #5690-830H Barstool
PARTS QTY
A 11
G
C 17
H
E 2
K
D D
C C
B B
HARDWARE PARTS
B
D
F
FIGURE 2
I
D D
C C
A A
STEP 3 - Figure 3
Next attach Back (J) to Seat
Base (K) using 2 Bolts (A), 2
Spring Washers (C) and 2 Flat
Washers (D) from the center and
2 Bolts (B), 2 Spring Washers (C)
and 2 Flat Washers (E) from the
outside.
STEP 4 - Figure 4
Next attach leg assembly to
Seat Base (K) using 4 Bolts
(B), 4 Spring Washers (C) and
4 Flat Washers (D). Tighten all
bolts with Allen Wrench (F)
provided. The assembly is now
complete.
Date: 06-27-2016
Page 1 of 1
QTY HARDWARE
6
15
1
G
H