Kurzanleitung - nedis WIFILN51CRGB Guia De Inicio Rapido

• Do not drop the product and avoid bumping.
• Do not unplug the product by pulling on the cable. Always grasp
the plug and pull.
• This product may only be serviced by a qualified technician for
maintenance to reduce the risk of electric shock.
• Always keep button cell batteries, both full and empty, out of
reach of children to avoid the chance of swallowing. Dispose of
used batteries immediately and safely. Button cell batteries can
cause serious internal chemical burns in as little as two hours
when swallowed. Keep in mind that the first symptoms may look
like child diseases like coughing or drooling. Seek immediate
medical attention when you suspect that batteries have been
swallowed.
• Only power the product with the voltage corresponding to the
markings on the product.
• Non-rechargeable batteries are not to be recharged.
• Do not short-circuit a battery.
• Make sure to match the (+) and (-) polarity markings.
• For more detailed information about disposal of your old battery,
check the local rules and regulations for the correct disposal
instructions.
Installing the app
1. Download the Nedis Smartlife app for Android or iOS on your
phone via Google Play or the Apple App Store.
2. Open the Nedis Smartlife app on your phone.
3. Create an account with your e-mail address and tap Continue.
4. Enter the received verification code.
5. Create a password and tap Done.
6. Tap Add Home to create a SmartLife Home.
7. Set your location, choose the rooms you want to connect with
and tap Done.
Connecting the product
1. Screw the NEMO connector A
2. Tap + in the top right corner in the Nedis SmartLife app.
3. Plug A
4 into a power outlet.
4. Under Search Device, select the product from the list of available
devices.
5. Check if the LED strip A
1
If A does not blink, unplug and replug A
4 1
source three times until A
6. Rename the product after it has been found and added.
7. Enter the password of the Wi-Fi network to which your phone is
connected and tap Confirm.
Setting up the product
1. Unplug A 4 from the power outlet.
2. Place the start of A
1 in the desired position.
Make sure the power outlet is within reach.
4
3. Place A 1 using the included mounting brackets A
A
3 , or use suitable adhesive.
Evenly space A to support A
2
4
- Do not bend A 1 at sharp angles to prevent damage.
If desired, cut A
1 to size.
4
- Cutting A
1 removes the waterproof qualities of the product.
- Shield the cut side of the LED strip A
for outdoor use.
4. Plug A
4 into a power outlet.
Controlling the product
• Press B
7 to switch the product on or off.
• Press the mode button B
2
• Press the brightness buttons B
• Press the colour buttons B
5
• Press the speed buttons B
3
The product can be connected to Google Home or Amazon
4
Alexa to enable speech control.
5 onto the power adapter A
is blinking. If so, confirm in the app.
from the power
4
1 starts to blink.
2 and screws
1 .
to make it waterproof
1
to change modes.
4 to adjust the brightness.
to adjust the colour.
to adjust the speed.
Declaration of Conformity
We, NEDIS, as manufacturer, declare that product WIFILN51CRGB
from the brand Nedis, produced in China was tested according to all
relevant CE standards / regulations and passed all tests.
The complete Declaration of Conformity ( + safety datasheet if
applicable ) can be found and downloaded via http://webshop.
nedis.com
For other compliant-related information, please contact customer
service desk for support:
via website: http://www.nedis.com
via e-mail: service@nedis.com
NEDIS B.V., De Tweeling 28,
5215 MC 's-Hertogenbosch, THE NETHERLANDS
c

Kurzanleitung

Wi-Fi Outdoor
Neon-LED-Streifen
Weitere Informationen finden Sie in der erweiterten
Anleitung online: ned.is/wifiln51crgb
Bestimmungsgemäße Verwendung
Dieses Produkt ist ein Smart-WLAN-LED-Streifen mit einer drahtlosen
Fernbedienung.
Das Produkt ist nicht für den professionellen Einsatz gedacht.
Das Produkt ist nur zur Verwendung innerhalb von Gebäuden
gedacht.
Jegliche Modifikation des Produkts kann Folgen für die Sicherheit,
Garantie und ordnungsgemäße Funktionalität haben.
Spezifikationen
4 .
Produkt
Artikelnummer
LED-Leiste
Länge LED-Streifen
Breite LED-Streifen
Helligkeit
Lichtfarbe
LED-Typ
LED-Anzahl
Leistung
Arbeitstemperatur
Steuerung
Abmessungen
Eingangsspannung
Max. Strom
Nennleistung
Frequenzbereich
Max. Sendeleistung
Wasserdicht
Hauptbestandteile (Abbildung A)
LED-Leiste
1
Montagehalterung (10x)
2
3 Schrauben (20x)
Netzteil
4
4
WIFILN51CRGB
Wi-Fi Outdoor
Neon-LED-Streifen
WIFILN51CRGB
5 m
17 mm
960 lm
RGB
5050
60 /m
32 W
-20 °C – 50 °C
70 x 30 x 15 mm
24 V
1.5 A
36 W
2412 - 2484 MHz
16 dBm
IP44
NEMO-Anschlussstecker
5
IR-Empfänger
6
7 Fernbedienung